Support User Manuals

Furuno FM-3000 Telephone User Manual

Open as PDF

of 76

7.Set Mode

38

7.2 Set Mode Items

7.2.1 Scan mode

The transceiver has 2 scan modes: Normal scan and Priority

scan. Normal scan searches all tag channels in the selected

channel group. Priority scan searches all tag channels in se-

quence while monitoring Channel 16.

7.2.2 Scan resume timer

The scan resume timer can be selected as a pause (OFF) or

timer scan (ON). When OFF is selected, the scan pauses

until the signal disappears. When ON is selected, the scan

pauses 5 sec. and resumes even if a signal has been re-

ceived on channels any other channel than Channel 16.

7.2.3 Weather alert

A NOAAbroadcast station transmits a Weather alert tone be-

fore important weather information. When the Weather alert

function is turned ON, the transceiver detects the alert tone,

then blinks the “WX ALT” indicator and sounds beep tones

until the transceiver is operated. The previously selected

(used) weather channel is checked any time during standby

or while scanning.

•“WX ALT” appears instead of “WEATHER” indication when the

function is set ON.

7.2.4 Dual/Tri-watch

This item sets the [

CH/WX

]( )key function as Dual-

watch or Tri-watch.

SetMode

DUAL/TRI

Dualwatch (default) Tri-watch

U/I/CDW

SetMode

WXAlert

Weather alert OFF (default) Weather alert ON

SetMode

ScanTimer

Scan timer OFF (default) Scan timer ON

SetMode

ScanMode

Normal scan (default) Priority scan

previous next