Furuno FM-3000 Telephone User Manual


  Open as PDF
of 76
 
25
5.DSC Operation
5.6.5 Transmitting Position Request call
Transmit a Position Request call when you want to know a
specific ship’s current position, etc.
q Push [
DSC/ENT
] to enter the DSC menu.
w Rotate [
CHANNEL
] to select “POS Request,” push
[
DSC/ENT
].
e Rotate [
CHANNEL
] to select the desired pre-programmed
individual address or “Manual Input,” push
[
DSC/ENT
].
•The ID code for the Position Request call can be set in advance.
(p. 13)
•When “Manual Input” is selected, set the 9-digit ID code
(1st digit must not be ‘0’) for the individual you wish to call by
using [
CHANNEL
].
-Push [
CH/WX
] or [
SCAN
] for cursor movement.
-After 9-digit is input, push [
DSC/ENT
] to set the ID code.
r Push [
DSC/ENT
] to transmit the Position Request call.
t After the Position Request call has been transmitted, the
following indication is displayed.
y Push any key to exit the condition and return to the normal
operation.
POSREQ
WaitforACK
Completed
ToCall,
ToCancel
[other]
[DSC/ENT]
SelAddress
Ricky
ManualSet
˘Tom
SelItem
Group
Allships
˘POSRequest
 previous next