Filter
Top Products
Dialogic
®
Global Call IP Technology Guide — November 2007 583
Dialogic Corporation
IP-Specific Event Cause Codes
IPEC_RASReasonDuplicateAlias (0xfad, 4013 decimal)
The alias is registered to another endpoint. (In RRJ messages.)
IPEC_RASReasonTransportNotSupported (0xfae, 4014 decimal)
One or more of the transport addresses are not supported. (In RRJ messages.)
IPEC_RASReasonCallInProgress (0xfaf, 4015 decimal)
A call is already in progress. (In URJ messages.)
IPEC_RASReasonRouteCallToGatekeeper (0xfb0, 4016 decimal)
The call has been routed to a gatekeeper. (In ARJ messages.)
IPEC_RASReasonRequestToDropOther (0xfb1, 4017 decimal)
Unable to request to drop the call for others. (In DRJ messages.)
IPEC_RASReasonNotRegistered (0xfb2, 4018 decimal)
Not registered with a gatekeeper. (In DRJ, LRJ, and INAK messages.)
IPEC_RASReasonUndefined (0xfb3, 4019 decimal)
Unknown reason. (In GRJ, RRJ, URJ, ARJ, BRJ, LRJ, and INAK messages.)
IPEC_RASReasonTerminalExcluded (0xfb4, 4020 decimal)
Permission failure and not a resource failure. (In GRQ messages.)
IPEC_RASReasonNotBound (0xfb5, 4021 decimal)
Discovery permission has expired. (In BRJ messages.)
IPEC_RASReasonNotCurrentlyRegistered (0xfb6, 4022 decimal)
The endpoint is not registered. (In URJ messages.)
IPEC_RASReasonRequestDenied (0xfb7, 4023 decimal)
No bandwidth is available. (In ARJ messages.)
Unable to find location. (In LRJ messages.)
IPEC_RASReasonLocationNotFound (0xfb8, 4024 decimal)
Unable to find location. (In LRJ messages.)
IPEC_RASReasonSecurityDenial (0xfb9, 4025 decimal)
Security access has been denied. (In GRJ, RRJ, URJ, ARJ, BRJ, LRJ, DRJ, and INAK
messages.)
IPEC_RASTransportQOSNotSupported (0xfba, 4026 decimal)
QOS is not supported by this gatekeeper. (In RRJ messages.)
IPEC_RASResourceUnavailable (0xfbb, 4027 decimal)
Resources have been exhausted. (In GRJ, RRJ, ARJ and LRJ messages.)
IPEC_RASInvalidAlias (0xfbc, 4028 decimal)
The alias is not consistent with gatekeeper rules. (In RRJ messages.)
IPEC_RASPermissionDenied (0xfbd, 4029 decimal)
The requesting user is not allowed to unregistered the specified user. (In URJ messages.)
IPEC_RASQOSControlNotSupported (0xfbe, 4030 decimal)
QOS control is not supported. (In ARJ messages.)
IPEC_RASIncompleteAddress (0xfbf, 4031 decimal)
The user address is incomplete. (In ARJ messages.)