Filter
Top Products
Dialogic
®
Global Call IP Technology Guide — November 2007 527
Dialogic Corporation
IP-Specific Parameters
9.2.20 IPSET_REG_INFO
Table 62 shows the parameter IDs in the IPSET_REG_INFO parameter set.
Table 62. IPSET_REG_INFO Parameter Set
Parameter IDs Data Type & Size Description
SIP/
H.323
IPPARM_OPERATION_
REGISTER
Type: char
Size: sizeof(char)
Used to specify the type of registration
operation to perform with a gatekeeper or
registrar. Possible values are:
• IP_REG_ADD_INFO
• IP_REG_DELETE_BY_VALUE
• IP_REG_QUERY_INFO (SIP only)
• IP_REG_SET_INFO
both
IPPARM_OPERATION_
DEREGISTER
Type: char
Size: sizeof(char)
Used when deregistering an endpoint
with a gatekeeper/registrar. Possible
values are:
• IP_REG_DELETE_ALL – Discard the
registration data in the local database
• IP_REG_MAINTAIN_LOCAL_INFO –
Keep the registration data in the local
database
both
IPPARM_REG_ADDRESS Type: IP_REGISTER_
ADDRESS
Size:
sizeof(IP_REGISTER_
ADDRESS)
Address information to be registered with
a gatekeeper/registrar.
See the reference page for
IP_REGISTER_ADDRESS on page 550
for details.
both
IPPARM_REG_
AUTOREFRESH
Type: char
Size: sizeof(char)
Used to enable/disable autorefresh of SIP
registration bindings. Possible values are:
• IP_REG_AUTOREFRESH_DISABLE
• IP_REG_AUTOREFRESH_ENABLE
Default behavior if this parameter is not
specified is to autorefresh bindings.
SIP
only
IPPARM_REG_TYPE Type: int
Size: sizeof(int)
The registration type. Possible values are:
• IP_REG_GATEWAY
• IP_REG_TERMINAL
H.323
only
IPPARM_REG_SERVICEID Type: int
Size: sizeof(int)
The Service ID that was handed back to
the application when it initiated the
registration
SIP
only
IPPARM_REG_STATUS Type: char
Size: sizeof(char)
Indicates whether or not the endpoint’s
registration with a gatekeeper/registrar
was successful. Possible values are:
• IP_REG_CONFIRMED
• IP_REG_REJECTED
both