Filter
Top Products
570 Dialogic
®
Global Call IP Technology Guide — November 2007
Dialogic Corporation
IP-Specific Event Cause Codes
IPEC_CHAN_REJECT_separateStackEstablishmentFailed
A request to run the data portion of a call on a separate stack failed.
IPEC_CHAN_REJECT_invalidSessionID
Attempt by the slave to set the SessionID when opening a logical channel to the master.
IPEC_CHAN_REJECT_masterSlaveConflict
Attempt by the slave to open logical channel in which the master has determined a conflict
may occur.
IPEC_CHAN_REJECT_waitForCommunicationMode
Attempt to open a logical channel before the MC has transmitted the
CommunicationModeCommand.
IPEC_CHAN_REJECT_invalidDependentChannel
Attempt to open a logical channel with a dependent channel specified that is not present.
IPEC_CHAN_REJECT_replacementForRejected
A logical channel of the type attempted cannot be opened using the replacement For
parameter.The transmitter may wish to re-try by first closing the logical channel that is to be
replaced, and then opening the replacement.
IPEC_CALL_END_timeout
A callback was received because a local timer expired.
IPEC_H245EstChannelFailure_MSDError
Establishment of optional H.245 channel in H.323 fast start connection failed due to error in
MasterSlaveDetermination (MSD) exchange.
IPEC_H245EstChannelFailure_RemoteReject
Establishment of optional H.245 channel in H.323 fast start connection failed due to rejection
on remote side.
IPEC_H245EstChannelFailure_TCSError
Establishment of optional H.245 channel in H.323 fast start connection failed due to error in
TerminalCapabilitySet (TCS) exchange.
IPEC_H245EstChannelFailure_TransportError
Establishment of optional H.245 channel in H.323 fast start connection failed due to transport
error.
IPEC_InternalError
An internal error occurred while executing asynchronously.
IPEC_INFO_NONE_NOMORE
No more digits are available.
IPEC_INFO_PRESENT_MORE
The requested digits are now available. More/additional digits are available.
IPEC_INFO_PRESENT_ALL
The requested digits are now available.
IPEC_INFO_NONE_TIMEOUT
No digits are available; timed out.
IPEC_INFO_SOME_NOMORE
Only some digits are available, no more digits will be received.