Filter
Top Products
482 Dialogic
®
Global Call IP Technology Guide — November 2007
Dialogic Corporation
Multiple aliases are supported when the target protocol for registration is SIP, but prefix
information is ignored.
When using SIP, auto-refresh is enabled by default if there is no IPSET_REG_INFO /
IPPARM_REG_AUTOREFRESH parameter specified. The default for the requested expiration
time is 3600 seconds; the actual expiration time is determined by the Registrar.
8.3.23 gc_RespService( ) Variances for IP
This function is only supported in asynchronous mode.
The gc_RespService( ) function operates on an IPT board device and is used to respond to requests
from an H.323 gatekeeper or a SIP registrar.
Table 39. Registration Information When Using SIP
Set ID Parameter IDs
GCSET_SERVREQ PARM_REQTYPE †
• Value = IP_REQTYPE_REGISTRATION
GCSET_SERVREQ PARM_ACK †
IPSET_LOCAL_ALIAS IPPARM_ADDRESS_DOT_NOTATION
IPPARM_ADDRESS_EMAIL
IPPARM_ADDRESS_TRANSPARENT
Data type: String
IPSET_PROTOCOL IPPARM_PROTOCOL_BITMASK
Bitmask composed from one or both of the following values:
• IP_PROTOCOL_H323
• IP_PROTOCOL_SIP
IPSET_REG_INFO
See Section 9.2.20, “IPSET_REG_INFO”,
on page 527, for more information.
IPPARM_OPERATION_REGISTER, with defined values:
• IP_REG_ADD_INFO
• IP_REG_DELETE_BY_VALUE
• IP_REG_QUERY_INFO
• IP_REG_SET_INFO
IPPARM_OPERATION_DEREGISTER, with defined values:
• IP_REG_MAINTAIN_LOCAL_INFO
• IP_REG_DELETE_ALL
IPPARM_REG_ADDRESS
• Value = IP_REGISTER_ADDRESS structure
See the reference page for IP_REGISTER_ADDRESS on
page 550 for more information
IPPARM_REG_AUTOREFRESH, with defined values:
• IP_REG_AUTOREFRESH_DISABLE
• IP_REG_AUTOREFRESH_ENABLE
† Mandatory parameters. These parameters are required to support the generic service request mechanism provided by
Dialogic
®
Global Call API and are not sent in any registration message.