Filter
Top Products
Dialogic
®
Global Call IP Technology Guide — November 2007 511
Dialogic Corporation
IP-Specific Parameters
• IPSET_LOCAL_ALIAS
• IPSET_MEDIA_STATE
• IPSET_MIME and IPSET_MIME_200OK_TO_BYE
• IPSET_MSG_H245
• IPSET_MSG_Q931
• IPSET_MSG_REGISTRATION
• IPSET_MSG_SIP
• IPSET_NONSTANDARDCONTROL
• IPSET_NONSTANDARDDATA
• IPSET_PROTOCOL
• IPSET_REG_INFO
• IPSET_RTP_ADDRESS
• IPSET_SDP
• IPSET_SIP_MSGINFO
• IPSET_SIP_REQUEST_ERROR
• IPSET_SIP_RESPONSE_CODE
• IPSET_SUPPORTED_PREFIXES
• IPSET_SWITCH_CODEC
• IPSET_TRANSACTION
• IPSET_TUNNELEDSIGNALMSG
• IPSET_VENDORINFO
9.2.1 GCSET_CALL_CONFIG
Table 43 shows the parameter IDs in the GCSET_CALL_CONFIG parameter set that are relevant
in an IP context.
Table 43. GCSET_CALL_CONFIG Parameter Set
Parameter ID Data Type & Size Description
SIP/
H.323
GCPARM_CALLPROC Type: enumeration
Size: sizeof(char)
Values:
• GCCONTROL_APP - The application
must use gc_CallAck( ) to send the
Proceeding message. This is the default.
• GCCONTROL_TCCL - The stack sends
the Proceeding message automatically.
Used to specify if the
Proceeding message is
sent under application
control or automatically by
the stack
both