Filter
Top Products
Clarity - INT9 A/D converter Installation
9
2.3.2 Connection of starting cables:
Starting input reacts to a change of the TTL
logical level (5V) or to a connection by any
contact (button, contact of relay).
The input implicitly reacts to a change from
HIGH to LOW (or closing of a contact). The input
function may be altered by changing the Down
option to Up in the External Start/Stop section
of the
Method Setup - Measurement dialog (accessible
from the
Instrument window using the - Method -
Measurement command).
Note: For schemes and hints describing the typical
autosampler wirings see the Device setup and
wiring chapter of the Getting Started Manual.
2.4 Clarity configuration
1. Start the Clarity station by clicking on the
icon on the desktop.
2. Invoke the System Configuration dialog using the
System – Configuration command.
3. Press the Add button (see Fig. 4) to invoke
the Available Control Modules dialog.
4. Select the DataApex INT9 A/D Card and press
the Add button.
5. The INT9 A/D Card Setup dialog will appear.
Fig. 3. INT9 A/D Card Setup