Filter
Top Products
Clarity - INT9 A/D converter Troubleshooting
22
4.2.1 How to check the INT9 driver:
How to check the INT9 driver:
Windows
2000/XP/
Vista
In the Start menu (lower left corner of the screen), select
Settings – Control Panel, and the System icon; under the
Hardware tab click the Device Manager button and in the
resulting list look for the Chromatography Devices -
DataApex Acquisition Device Model 9.xx item.
In the following image, all drivers (except for
the driver for U-PAD2) are installed correctly.
Fig. 13. Device Manager in Windows XP
Error status of the driver:
• If the “Chromatography Device – DataApex Ac-
quisition device, Model 9.xx” - item does not
appear, then the driver has not been installed.
Solution: Reinstall the driver manually as described in
section 4.3 on pg. 23.
• The driver is installed, but there is a yellow
exclamation mark
(or a question mark)
over its icon, or it is not behaving as expected.
The driver is probably installed incorrectly.
Solution: Uninstall the incorrect driver and install the
correct one as described in section 4.3, pg. 23.
• The item does appear, but is displayed with a
cross symbol.
Solution: Double-click the item to invoke the General tab
and activate the driver by clicking on the
Enable this device button.