Filter
Top Products
Clarity - INT9 A/D converter Using the INT9 card
15
Channel 1 (to 4)
For each channel of the INT9 A/D Converter
the name of the signal can be edited in the
Name field and the Set Units... button
can be used to change other signal parametres.
Effects of these changes can be seen in other
fields of the respective Channel 1 (to 4) section.
Name
This field will be used to describe the signal
in the Chromatogram window.
Inversion of Signal
Inverts the polarity of the signal from the
detector. This function can also be used for
easy correction of inversely connected wires.
Bipolar
Both positive and negative voltages will be
measured. Unchecking the Bipolar option
will improve the resolution of the signal by 1
bit. On the other hand, it will also restrict
the measuring of negative signals (i.e. below
zero).
Set Units...
Invokes the Detector Units dialog.
Fig. 9. Detector Units
• Quantity – Field for entering the quantity of
the units.
• Units – Field for entering the unit symbol,
along with the prefix.
• Coefficient – Allows to enter the coefficient
between the selected units and mV (default).
• Autoprefix – Allows to enter the unit prefix.
In graphs, units will be scaled automatically,
while in the tables, units with the prefix
entered will be used.