Filter
Top Products
Clarity - INT9 A/D converter Installation
6
2 Installation
Ensure that you have Administrator access
rights to your Windows OS before you proceed
with the installation.
2.1 The INT9 Card
• Install Clarity software from the CDROM.
Caution! Install the Clarity software before inputting any
devices.
• Plug in the HW Key (described in the Getting
Started manual)
• Turn off the PC
• Plug the INT9 card into the PCI slot
• Start the PC
a) MS Windows 2000/XP/Vista and later
In Windows 2000/XP/Vista the drivers were
installed automatically
during the installation
of the Clarity software.
b) Previous versions of MS Windows
In systems other than Windows 2000/XP/
Vista follow the procedure described in chapter
4.3 on pg. 23.
• The driver is now installed, proceed to setup
and wiring.
Note: When installing multiple INT9 cards, a PC restart is
recommended, after the installation, in order to
prevent the reassignment of INT9 acquisition
channels between Clarity
Instruments.
2.2 Standard cable for Clarity station
The standard Clarity station package includes
a cable set composed of signal and starting
cables for connecting the CLARITY station to
the chromatograph.
• Signal cables
Labelled “DET1” to “DET4” (according to the
number of channels), the cables are supplied
as standard without connectors [bare stripped