Filter
Top Products
Clarity - INT9 A/D converter Installation
12
2.4.2 Using multiple INT9 cards
When using multiple A/D cards, it will be
necessary to add the INT9 card again,
repeating the entire procedure described in
chapter 2.4 from Step 3.
Fig. 6. System Configuration – two INT9 cards
Individual detectors from all cards can be
assigned to multiple instruments and
combined together arbitrarily. In this example,
all signals from INT7 A/D Card, as well as all
signals from INT9 A/D Card 2 and one signal
(Pressure) from INT9 A/D Card 1 are assigned
to the instrument 1, while the rest of the
signals from INT9 A/D Card 1 is assigned to
the Instrument 2.
While there are several cards assigned to the
same instrument, it is necessary to select
which card will be used for Start and Ready
signals .
All added A/D converters (e.g. INT9) must have
their drivers properly installed. There must be
correct number of items in the Windows OS