Filter
Top Products
4-6
User Guide for Cisco Home Agent Service Manager
OL-6918-01
Chapter 4 Using Service Manager
Generating Sync Reports
The HA Config Viewer window displays:
• Left pane—Displays all the configlets that the configuration comprises. Click any folder to expand
the tree and display descendant configlets. Choose any configlet to see the required commands.
• Right pane—Displays all the configuration commands corresponding to each configlet in
alphanumeric order.
Step 4 Click Close to exit the HA Config Viewer.
Generating Sync Reports
You can use the Sync Report to compare the HA-specific configurations of the master device and those
of the other devices in the group, and two selected devices.
The Sync Report tab displays:
• Sync Report Dashboard—Displays the latest status of the master device and other devices in a
group, from RME or DCR. Generates a list of differences between the HA-specific configurations
of the master device and those of any other device in the group.
• Compare Config—Displays the differences in HA-specific configurations between any two devices
of the group.
To generate a sync report:
Step 1 Choose a device group (Choose Service Manager > Select Group). See Selecting an HA Device Group,
page 4-3.
Step 2 Choose Service Manager > Sync Report. The overview page appears with the table of contents in the
left pane. From here you can go to:
• Sync Report Dashboard—See Using Sync Report Dashboard, page 4-7.
• Compare Config—See Comparing the Configurations of Two Devices, page 4-11.