Filter
Top Products
4-28
User Guide for Cisco Home Agent Service Manager
OL-6918-01
Chapter 4 Using Service Manager
Activating Services on HA Devices
The first window of the Security Associations wizard contains:
Field Description
Peer Type Choose a peer type from the drop-down list. It can be one of the
following:
• Host
• Home Agent
• Foreign Agent
Mobile Node Identity
Click the IP Address or Host NAI String radio button to specify
the NAI string or the home IP address of the mobile node.
IP Address Click the IP Address radio button to specify the IP address of the
mobile node.
Lower IP address of the host, Home Agent, Foreign Agent, or the lower
range of IP address pool.
Higher (Optional) Upper range of the IP addresses pool.
Host NAI String Specify the network access identifier of the mobile node. It is a
unique identifier with the syntax username@realm.
Click Fetch to select a NAI string from a list. A popup appears with
a list of NAI strings. Choose a NAI string and click Select. Click the
column heading to sort the list.
This radio button is disabled if you choose Home Agent or Foreign
Agent as the peer type.
Bidirectional SPI Click the Bidirectional SPI radio button to specify the bidirectional
SPI. The range is from 256 to 4294967295 (decimal) or 0 to ffffffff
(hex).
Unidirectional SPI Click the Unidirectional SPI radio button to specify the inbound
and outbound SPIs. If Home Agent receives an inbound SPI, then
outbound SPI will be used when sending a response.
Inbound Select Decimal or Hex from the drop-down list and specify the SPI
to authenticate the inbound registration packets. The range is from
256 to 4294967295 (decimal) or 0 to ffffffff (hex)
Outbound Select the format of the SPI (Decimal or Hex) from the drop-down
list, and specify the SPI to authenticate the outbound registration
packets. The range is from 256 to 4294967295 (decimal) or 0 to
ffffffff (hex)
Security Key Select the format of the key (ASCII or Hex) from the drop-down
list, and specify the shared secret key for the security associations.
The key is used to wrap the registration information for
authentication and calculate the message digest.
You cannot use spaces in the string.