Filter
Top Products
4-27
User Guide for Cisco Home Agent Service Manager
OL-6918-01
Chapter 4 Using Service Manager
Activating Services on HA Devices
The Home Agent Security Associations dialog box displays a list of configured security associations for
the mobile node, Home Agent, or Foreign Agent, in the selected group. It contains:
Click any column heading to sort the list.
Step 3 From the Home Agent Security Associations dialog box, you can:
• Click Execute without selecting a peer type to configure a new security association in the selected
group.
• Choose a peer type and:
–
Click Execute to modify its security association.
–
Click List to see its current security association.
–
Click Delete to delete it. You can also delete one or more security associations at the same time.
When you select one or more security associations, the Execute and List buttons will be disabled.
For more information, see Configuring Security Associations, page 4-27.
Configuring Security Associations
You can configure the security associations for the MN, Home Agent, or Foreign Agent using a Security
Associations wizard.
To launch the Security Associations wizard:
Step 1 Choose a device group (Choose Service Manager > Select Group). See Selecting an HA Device Group,
page 4-3.
Step 2 Choose HA Service Manager > Service Activation > Security Associations.
The Home Agent Security Associations dialog box displays a list of configured security associations for
the MN, Home Agent, or Foreign Agent in the selected group.
Step 3 Perform one of these actions:
• To create a security association for a peer type, click Execute without selecting one.
• Select the security association you want to modify, then click Execute.
Field Description
Peer Type Specifies the peer type. It can be one of the following:
• Host
• Home Agent
• Foreign Agent
Peer Identity Specifies the NAI string or the home IP address of the mobile node.
SPI Specifies the Security parameter index (SPI). This is used to authenticate a
mobile user during mobile IP registration.