Filter
Top Products
4-33
User Guide for Cisco Home Agent Service Manager
OL-6918-01
Chapter 4 Using Service Manager
Activating Services on HA Devices
VRF Definition Dialog Box Field Descriptions
When you click Define in the VRF for Realm pane, the VRF Definition dialog box appears. You can
use this dialog box to configure a new VRF routing table from this dialog box. It displays:
Loopback Interface Dialog Box Field Descriptions
When you click Assign to Loopback in the Virtual Home Agent pane, the Loopback Interface dialog
box appears. Itdisplays:
Enter the required information and click Submit.
Field Description
VRF Info
Instance Name Specifies a unique name by which to identify the VRF for a specific group.
Description Describes the VRF.
Route Distinguisher Specify a route distinguisher after you create a VRF. Otherwise, the VRF will
not operate.
A route distinguisher (RD) creates routing and forwarding tables for a VPN. RD
includes an autonomous system number and an arbitrary number, or it is
IP-address-relative (includes an IP address and an arbitrary number).
You can enter an RD in one of these formats:
• 16-bit AS number: your 32-bit number.
For example, 101:3
• 32-bit IP address: your 16-bit number
For example, 192.168.122.15:1
Field Description
Loopback Interface Information
IP Address Assign an IP network address to the interface.
Subnet Mask Assign a network mask to the interface
Loopback Interface No. Specify the number of the loopback interface that you want to create or
configure. There is no limit on the number of loopback interfaces you can
create.
Assign as Secondary IP Check the Assign as Secondary IP check box to assign the above IP address
as a secondary address on the loopback interface.