Filter
Top Products
4-14
User Guide for Cisco Home Agent Service Manager
OL-6918-01
Chapter 4 Using Service Manager
Activating Services on HA Devices
Click any column heading to sort the list. From this window:
• Click Add Row to add more address pools.
• Select any row and click Delete Row to delete the address pool, or extra rows.
Step 4 Enter the information and click Next.
The Local IP Pool Configurations window appears and displays the generated configuration commands.
Step 5 Click Add To Batch to execute the configuration in a batch mode if you do not want to download them
immediately. The Batch Mode window appears. You must leave the Batch Mode window open to add
multiple service-activation commands to the same batch.
From the Batch Mode window, you can:
• Click Save to save the configuration in a batch file and download it later. A popup window appears
where you can specify a name for the batch file, or add the configuration to an existing batch file.
• Click Download to save it to the work queue.
HA SM schedules a new job. A notification message displays the Job ID. After the job completes,
you can view the details of the job in the Job Details window. See Viewing Job Details, page 4-15,
for more information on the job details.
• Click Clear to clear the batch profile.
• Click Close to close this window.
If you do not save the batch file, a message prompts you to save it. Click OK to save and Cancel to
exit the window.
Step 6 Perform one of these actions:
• Click Finish to complete the configuration.
HA SM schedules a new job. A notification message displays the Job ID. After the job completes,
you can view the details of the job in the Job Details window. See Viewing Job Details, page 4-15,
for more information on the job details.
• Click Cancel to exit the wizard.
• Click Back to edit the configuration.
Cache-Size (Optional) Specify the number of IP address entries on the free list that the
system checks before assigning a new IP address. The range is from 0 to 100,
and the default is 20.
Local IP Pool Group (Optional) Specify a pool group to associate it with the local IP address pool.
You can associate an IP address pool with only one group.
You can configure overlapping IP address pool groups to create different
address spaces and concurrently use the same IP addresses in different address
spaces.
Field Description