Filter
Top Products
4-2
User Guide for Cisco Home Agent Service Manager
OL-6918-01
Chapter 4 Using Service Manager
Service Manager Tasks
Service Manager Tasks
You can use the Service Manager tab to perform these tasks:
Table 4-1 Home Agent Service Manager Tasks
Option Task Topic
Select Group Select a device group Selecting an HA Device Group, page 4-3
Display Config Display HA configuration
commands of a device
Displaying an HA Configuration, page 4-5
Sync Report Check the latest status of the master
device and other devices in a group,
from RME or DCR.
Checking Device Status, page 4-7
Generate a Sync report. Generating a Diff Report, page 4-7
Display the differences in
HA-specific configurations between
any two devices of the group.
Comparing the Configurations of Two Devices,
page 4-11
Service
Activation
Activate various services Activating Services on HA Devices, page 4-12
Configure local IP pools Local IP Pools, page 4-12
Configure virtual networks Working With Virtual Networks, page 4-17
Assign home addresses with NAI Assigning Home Addresses With NAI, page
4-19
Assign home addresses without
NAI
Assigning Home Addresses Without NAI, page
4-23
Configure security associations for
the mobile host, Home Agent, or
Foreign Agent
Security Associations, page 4-26
Configure VRF support on HA
devices
VRF Support on HA, page 4-30
Enable Hot-Lining Hot-Lining, page 4-34
Batch
Configuration
Manage batch configurations Managing Batch Configurations, page 4-36