Filter
Top Products
Part 3 Using the CASIO Programs
99
3. Perform steps 4 and 5 under “To assign an application to a main menu button” on
page 98 to make the button settings you want.
4. After everything is the way you want, tap OK to return to the button selection screen.
5. Tap [x] to return to the main menu.
Note
Double-tapping a submenu button in step 2 of the above procedure displays the
Submenu Settings dialog. See “Submenu Buttons” on page 100 for information about
using this dialog.
To change the icon of a button
1. On the main menu, tap to display the button selection screen.
2. Tap the button whose icon you want to change to select it (indicated by a frame
around the button).
3. Tap
to display the Define dialog.
4. Tap Change Icon to display the Change Icon dialog.
5. Tap the icon you want to assign to the button.
6. After the icon is the way you want, tap OK to return to the Define dialog.
7. Tap OK to return to the button selection screen.
8. Tap [x] to return to the main menu.
To clear the settings of a button
1. On the main menu, tap to display the button selection screen.
2. Tap the button whose settings you want to clear to select it (indicated by a frame
around the button).
3. Tap
.
4. In response to the confirmation message that appears, tap Yes to clear the settings of
the button or No to close the message dialog without doing anything.
5. Tap [x] to return to the main menu.
To move a button
1. On the main menu, tap to display the button selection screen.
2. Tap the button you want to move to clear to select it (indicated by a frame around
the button).
3. Tap
to cut all the settings of the button and move them to the clipboard. This is a
cut operation, so the settings are deleted from the original button.