Filter
Top Products
PHONE LINE MANAGER 16 X 4
59
19.7 Outside Line Guard Time
Once an outside call is complete (that is, one of the parties hangs up), that particular outside line is inactive
for a defined period of time. This gives the Central Office an on hook condition for this amount of time.
6. Enter the “outside line guard time” code:
0 0.75 seconds
1 1.5 seconds
* 2 2.25 seconds
3 3 seconds
4 3.75 seconds
5 4.5 seconds
6 5.25 seconds
7 6 seconds
8 6.75 seconds
9 7.5 seconds
19.8 Pulse-Dialing Timing
These settings relate to pulse-mode dialing only. Break time is the time for generating a single pulse; it is the
amount of time the line goes on-hook to send a dial pulse. Make time is the off-hook time between dial
pulses.
7. Enter the “pulse dialing break time” code:
0 48 milliseconds
1 56 milliseconds
* 2 64 milliseconds
3 72 milliseconds
4 80 milliseconds
5 88 milliseconds
6 96 milliseconds
7 104 milliseconds
8 112 milliseconds
9 120 milliseconds