Filter
Top Products
PHONE LINE MANAGER 16 X 4
36
4. Enter the digit that specifies the weekend day/days during which automatic switching into the day mode
is enabled or disabled.
0 Disable switching into Day mode on Friday, Saturday, and Sunday.
1 Enable Day mode on Sunday.
2 Enable Day mode on Saturday.
3 Enable Day mode on Sunday and Saturday.
* 4 Enable Day mode on Friday.
5 Enable Day mode on Friday and Sunday.
6 Enable Day mode on Friday and Saturday.
7 Enable Day mode on Friday, Saturday, and Sunday.
5. Pause for confirmation tone. Hang up or continue programming.
If Automatic Day/Night Switching is enabled, the Phone Line Manager 16 x 4 will automatically determine
(upon power up or Switching time changes) whether it should be in the Day or Night mode. For proper
operation, it is necessary that the time specified for switching into the Day mode must be earlier in the day
than the time specified for switching into the Night mode. Otherwise, improper operation will result.
If the Operator enters the 56 or 57 command to manually change the operating mode, automatic
switching will be disabled and must be re-enabled by the System Manager (if desired) by entering the 7826
command from the System Manager’s extension.