Filter
Top Products
AXIS A8004-VE Network Video Door Station
Events
• Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during
product installation and conguration.
• Stop Audio Clip – Stops playing a recorded audio clip when the Action rule is triggered.
• WDR Mode – The WDR Mode can be turned on or off when the action rule is triggered.
Add Recipients
The product can send media les and messages to notify users about events. Before the product can send media les or notication
messages, you must dene one ore more recipients. For information about available options, see Recipient Types on page 49.
To add a recipient:
1. Go to Events > Recipients and click Add.
2. Enter a descriptive name.
3. Select a recipient Type.
4. Enter the information needed for the recipient type.
5. Click Test to test the connection to the recipient.
6. Click OK.
Recipient Types
The following recipients are available:
Recipient Use with action Notes
Axis Door Controller Axis Door Control An Axis Door Controller enables access management of doors
that are connected to it. The Axis Door Controller recipient is
typically used when sending a DTMF sequence to open a door.
Email
Send Images
Send Notication
Send Video Clip
An email recipient can contain multiple email addresses.
FTP
Send Images
Send Video Clip
HTTP
Send Images
Send Notication
Send Video Clip
HTTPS Send Images
Send Notication
Send Video Clip
Encrypted le transfer using HyperText Transfer Protocol
Secure (HTTPS).
Specify login information for the HTTPS server and validate
the server’s certicate. If there is a proxy between the Axis
product and the HTTPS server, also specify the proxy settings.
Network Share Send Images
Send Video Clip
A network share can also be used as a storage device for
recorded video. Go System Options > Storage to congure
a network share before setting up a continuous recording or
an action rule to record video. For more information about
storage devices, see Storage on page 63.
49