Filter
Top Products
AXIS A8004-VE Network Video Door Station
Voice over IP (VoIP)
Successful – The account has successfully registered with the SIP registrar.
Failure – There is a problem with the account, such as the account credentials are wrong.
Create or Edit Accounts
To set up a SIP account:
1. Go to Setup > VoIP > Account Settings.
2. Click Add.
3. Enter the account details.
- See Account Information on page 32.
- See Account Credentials on page 32.
- See SIP Server Settings on page 33.
- See Transport Settings on page 33.
- See Proxy Settings on page 33.
4. Click OK.
To edit an account, select the account in the account list and click Modify.
To remove an account, select the account in the account list and click Remove.
Account Information
• Name – Enter a descriptive name. This can for example be a rst and last name, a role, or a location. The name is used as
an alias and is especially useful when several accounts have the same user ID.
• Default account – Select to make this the default account. Only one account can be the default account.
At startup, the rst time the product is accessed or after a reset, a peer account is created automatically and set to be the
default account. This peer account can only be removed if at least one more account has been added to the list.
The default account will be used when making a VAPIX
®
Application Programming Interface (API) call without specifying
which SIP account to call from. For more information, visit www.axis.com/developer.
Account Credentials
• User ID – User ID is typically the extension or phone number assigned to the Axis product at the SIP server. It is also
possible to use a SIP URI as a User ID if required by the SIP server.
• Authentication ID – Enter the Authenticaion ID used for authenticating against the SIP server. This is typically the
same as the User ID.
• Password – Enter the password associated with the SIP account for authenticating against the SIP server.
• Caller ID – The name that is presented to the receiver of the calls from this Axis product.
To create an account that is registered with a PBX or a service provider, enter the user ID, password, and the registrar address or
domain name. See SIP Server Settings below. If you only enter a user ID, the account will be used as a peer-to-peer account.
32