Filter
Top Products
13
Bluetooth
Glossary of terms
Below are some terms used in this user’s manual to help you become
familiar with using your Bluetooth devices and your new AT&T telephone
system.
Active devices - a Bluetooth enabled device, paired and connected to the
telephone base. A maximum of two paired devices (two cell phones, or one
cell phone and one headset) can be connected to the telephone base, but
only one can be on a call at a time.
Bluetooth cell phone - refers to a mobile Bluetooth enabled cellular
telephone.
CELLULAR line - the telephone line associated with your cell phone service.
On your TL92220/TL92270/TL92320/TL92370/TL92420/TL92470
handset, press CELLULAR to use the cell line.
Connected - a Bluetooth enabled device (cell phone or headset) can only be
used when it is connected to the telephone base. When a Bluetooth enabled
device is connected to the telephone base and listed on the active devices
list, it is ready for use.
Disconnected - a diagonal line appears across devices 1 and/or 2 when the
corresponding Bluetooth enabled device is disconnected from the
telephone base.
Discoverable mode - before a Bluetooth enabled device can be paired, it
must be set to this mode. When pairing your cell phone, the telephone base
is in this mode. Depending on the manufacturer, this mode is sometimes
referred to as Find Me or Visibility.
HOME line - your conventional telephone land line. On your TL92220/
TL92270/TL92320/TL92370/TL92420/TL92470 handset, press
HOME/FLASH to use the home line.
Paired devices - Bluetooth enabled devices (cell phone or headset) that
have shared registration information with the telephone base. A total of four
Bluetooth enabled devices can be paired with the telephone base; however,
only two paired devices can be connected to the base at a time.
Pairing - sometimes refers to as bonding. The process of sharing
registration information between two Bluetooth enabled devices. Your
Bluetooth enabled cell phone or headset must first be paired to the
telephone base in order to use it with this cordless phone system.
PIN - by default, the PIN is 0000 for the telephone base and for most
Bluetooth devices. PIN information must be exchanged between Bluetooth
devices before they can be used. This is also known as a Passkey
or Passcode.