Filter
Top Products
18
Bluetooth
Bluetooth setup
Paired devices
All paired devices are stored on the Paired devices list. Up to four devices
(cell phones and headsets) can be paired with the telephone base.
To use a paired device, it must be connected and on the active devices list
(page 20).
Once you have paired a device with the telephone base, you do not need
to repeat the pairing procedure again unless you delete the device from the
paired devices list.
NOTE: Only the first 15 characters of the device name are shown on the paired
devices list.
Rename a paired device
You can change the name of a paired device on the paired devices list.
Press MENU/SELECT on the handset when it is not
in use.
Press CID or DIR to highlight Bluetooth, then press
MENU/SELECT.
Press CID or DIR to highlight Paired devices, then
press MENU/SELECT.
Press CID or DIR to highlight a device when
necessary, then press MENU/SELECT.
Press CID or DIR to highlight Rename, then press
MENU/SELECT. The screen displays ENTER NEW NAME.
Use the dialing keys to edit the name (page 55).
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press CID to move the cursor to the left or DIR to
the right.
Press MENU/SELECT to confirm. The handset displays
Device renamed.
1.
2.
3.
4.
5.
6.
•
•
•
7.
Answering sys
Directory
Call log
Intercom
Bluetooth
BLUETOOTH
Add cellular
Add headset
Active devices
Paired devices
SELECT DEVICE
Headset A
Cell Phone AC
ENTER NEW NAME
Headset A _
Disconnect
Rename
Remove paired