Filter
Top Products
50
Multiple handset use
Intercom
Use the intercom feature for conversations between two system handsets.
You can buy additional expansion handsets (TL90070) for this telephone
system. You can register up to 12 handsets to the telephone base.
To initiate an intercom call
Press MENU/SELECT on the handset in idle mode.
Press CID or DIR to highlight Intercom, then press
MENU/SELECT.
If you have a two-handset system, your handset
displays Calling other handset. The destination
handset rings and displays Other handset is calling.
If you have more than two handsets, your handset
displays INTERCOM TO:. Press CID or DIR to select
a destination handset and then press MENU/SELECT.
You may also press 1-9 for HANDSET 1-9, *0 for
HANDSET 10, *1 for HANDSET 11 or *2 for
HANDSET 12. Your handset displays Calling HANDSET X. The other
handset rings and displays HANDSET X is calling.
To answer an intercom at the destination handset:
Press
HOME/FLASH or
/SPEAKER
. Both screens show Intercom.
To silence an intercom call:
Press OFF/CLEAR or MUTE/DELETE on the destination handset. Its screen
displays Ringer muted for a few seconds.
To end an intercom call:
Press OFF/CLEAR or place either handset back in the telephone base or
charger. Both handsets display Intercom ended.
NOTES:
You can cancel the intercom call before it is answered by pressing OFF/CLEAR on
your originating handset.
If the destination handset does not answer the intercom call within 100 seconds, is in
the directory or call log, or is out of range, the originating handset displays Unable to
call try again and returns to idle mode.
You can use a maximum of five handsets at a time. For example, when four handsets
are used on intercom calls, use another handset for an outside call. When two handsets
are used on an intercom call, you can use three other handsets for an outside call.
1.
2.
•
•
•
•
•
1.
2.
3.
INTERCOM TO:
HANDSET 2
HANDSET 3
HANDSET 4
HANDSET 5
Play messages
Answering sys
Directory
Call log
Intercom