Filter
Top Products
40
Telephone operation
Making, answering and ending a call
Using a Bluetooth headset for home calls
You can use a Bluetooth headset on home calls. However, you need to keep
the device within 15 feet of the telephone base for optimal performance.
Please see the user’s manual of your Bluetooth headset for more information.
To answer a home call using a Bluetooth headset:
Press the call key on your headset.
To end a home call you answered from a Bluetooth headset:
Press the call key on your headset.
If you make or answer a home call on a handset, you can transfer the call
to your headset. The handset remains active, but the handset earpiece and
microphone are muted. If you hang up the handset, the call ends.
To transfer a call from a handset to a Bluetooth headset:
Press MENU/SELECT twice to select Use headset.
If you have two headsets, press CID or DIR to select a headset, then press
MENU/SELECT. The handset shows Transferring audio to Headset X. To
cancel the call transfer, press OFF/CLEAR on your handset.
To transfer a call from the Bluetooth headset back to the handset:
Press MENU/SELECT twice to select Use handset.
To end a call that started at the handset:
Press OFF/CLEAR or put the handset in the telephone base or charger.
NOTES:
If you answer a call using a headset, and you lose the Bluetooth connection or the
battery is depleted, the call is lost.
If you are using a headset for a call which is transferred from a TL92220/TL92270/
TL92320/TL92370/TL92420/TL92470 handset, and you lose the Bluetooth
connection or the battery of the headset is depleted, the call is transferred back to the
originating handset.
Use headset only shows if a headset is paired (see pages 16-17).
If the transfer fails, the handset screen shows Transfer fail. Please turn ON headset &
place next to base. Press SELECT.
If the headset is not connected, the handset screen shows Headset not connected!
To connect, press SELECT. Press MENU/SELECT to connect your headset to the
telephone system. If the connection still fails, the handset shows Connection fail.
Please turn ON headset & place next to base. Press SELECT. Press MENU/SELECT to
resume the outside call with the original handset. Refer to the Pair a headset section
on pages 16-17.
•
•
•
•
•
1.
2.
3.
4.
5.