AT&T EL52303 Cordless Telephone User Manual


 
52
Answering system
Answering system settings
Number of rings
You can set the answering system to answer an incoming call after 2, 3, 4, 5,
or 6 rings. You can also select Toll saver, which is explained below. Unless
you change it, the answering system answers an incoming call after
three rings.
To set the number of rings:
Press MENU/SELECT in idle mode to enter the
main menu.
Press CID or DIR to scroll to Answering sys,
then press MENU/SELECT.
Press CID or DIR to scroll to Ans sys setup,
then press MENU/SELECT.
Press CID or DIR to scroll to # of rings, then press
MENU/SELECT.
Press CID or DIR to scroll and choose among
2, 3, 4, 5, 6 or Toll saver.
Toll saver- the answering system answers a call after two rings if
you have new messages, and after four rings when there are no new
messages. This feature allows you to check for new messages and avoid
paying long distance charges if you are calling from out of your local area.
Press MENU/SELECT to save your setting.
NOTE: If you subscribe to a voicemail service offered through your telephone service
provider, see Answering system and voicemail indicators on page 56.
1.
2.
3.
4.
5.
6.
# of rings
ECO
3
ECO