Filter
Top Products
Agilent Technologies, Inc. 8.CD.NL.A.03.11.97.R1.J.CW2F
Santa Clara Site
5301 Stevens Creek Boulevard
Santa Clara, California 95052-8059
Copyright Agilent
Technologies, Inc. 1994, 2000
All Rights Reserved.
Reproduction, adaptation, or
translations without prior
written permission is
prohibited, except as allowed
under the copyright laws.
Printed: December 2000
Printed in USA
Manual part number
05071-90042
Certification
and Warranty
Certification
Agilent Technologies
certifies that this product
met its published
specification at the time of
shipment from the factory.
Agilent further certifies that
its calibration measurements
are traceable to the United
States National Institute of
Standards and Technology
(formerly National Bureau of
Standards), to the extent
allowed by the Institute’s
calibration facility, and to
the calibration facilities of
other International
Standards Organization
members.
Warranty
Agilent warrants
Agilent hardware,
accessories and supplies
against defects in materials
and workmanship for a
period of one year from date
of shipment. If Agilent
receives notice of such
defects during the warranty
period, Agilent will, at its
option, either repair or
replace products which prove
to be defective. Replacement
products may be either new
or like-new.
Agilent warrants that
Agilent software will not fail
to execute its programming
instructions, for the period
specified above, due to
defects in material and
workmanship when properly
installed and used. If Agilent
receives notice of such
defects during the warranty
period, Agilent will replace
software media which does
not execute its programming
instructions due to such
defects.
For detailed warranty
information, see back matter.
Safety Considerations
General
This product and related
documentation must be
reviewed for familiarization
with this safety markings
and instructions before
operation.
This product is a safety
Class I instrument (provided
with a protective earth
terminal).
Before Applying Power
Verify that the product is set
to match the available line
voltage and the correct fuse
is installed. Refer to
instructions in Chapter 1 of
the Manual.
Before Cleaning
Disconnect the product from
operating power before
cleaning.
Safety Earth Ground
An uninterruptible safety
earth ground must be
provided from the mains
power source to the product
input wiring terminals or
supplied power cable.
Warning Symbols That
May Be Used In This
Book
Instruction manual symbol;
the product will be marked
with this symbol when it is
necessary for the user to
refer to the instruction
manual.
Indicates hazardous
voltages.
Safety Considerations
(contd)
Indicates earth (ground)
terminal.
or
Indicates terminal is
connected to chassis when
such connection is not
apparent.
Indicates Alternating
current.
Indicates Direct current.
WARNING
BODILY INJURY OR
DEATH MAY RESULT
FROM FAILURE TO HEED
A WARNING. DO NOT
PROCEED BEYOND A
WARNING SIGN UNTIL
THE INDICATED
CONDITIONS ARE FULLY
UNDERSTOOD AND MET.
CAUTION
Damage to equipment, or
incorrect measurement
data, may result from
failure to heed a caution.
Do not proceed beyond a
CAUTION sign until the
indicated conditions are
fully understood and met.
For additional safety and
acoustic noise information,
see back matter.