Filter
Top Products
Assembly-Level Service
Performance Tests
2-2
Performance Tests
This section describes the additions, changes, and deletions to the
information that appears in chapter 1 of the 5071A Primary
Frequency Standard Assembly-Level Service manual.
5071A Operational Verification
Rear-Panel Output Signal Checks
Step 2 at the top of page 1-9. second parenthetical sentence is changed
and has an additional sentence:
(Use manual settings if needed to check the front-panel 1 pps output.)
Verify that the G.70n referenced rear-panel telecommunications
outputs comply with ITU-T (formerly CCITT) G.703/6 (G.703/2 if
option 104 or 105 is present), formatted per G.704. Sync Out complies
per G.703/10, 75 Ω (Additionally @ 1.544 MHz if option 104 or 105 is
present.
Any TCO Option: