Filter
Top Products
NetVanta 7100 Administrator’s Guide Configuring the System
61200796L1-31A Copyright © 2007 ADTRAN, Inc. 73
Setting Up Status Groups
Status groups are used to allow ADTRAN/Polycom IP phones to monitor the current status of other users
or park zones. Configuring Status Groups creates the Busy Lamp Field (BLF) and Direct Station Select
(DSS) settings on user phones. Refer to Display Status Group (Busy Lamp Field) on page 37 to optionally
select a status group to display on the phone. Note that this feature is only available for the ADTRAN/
Polycom SoundPoint IP 601.
1. Navigate to the
Voice > Applications > Status Groups menu.
2. Enter a name for the new status group and select Add New Status Group.
Figure 58. Add/Edit/Delete Status Group Tab Menu
3. From the Status Group Details Menu, add users by selecting Add Users. Choose members from
the
Status Group Members list using the check boxes. In the Display Name column, specify
whether to identify the user in the status group by name or extension. This setting can be modified
later on.
4. Add Park Zones by selecting
Add Park Zones and choosing the appropriate zone from the list.
Figure 59. Status Group Details Menu
5. Select Apply to accept the new settings. An example of the phone display is shown in Figure 23 on
page 38.