Filter
Top Products
Modifying Existing Phones NetVanta 7100 Administrator’s Guide
40 Copyright © 2007 ADTRAN, Inc. 61200796L1-31A
4. In the Change Phone MAC Address/Model menu (see Figure 26), enter the New MAC Address
(or choose one from the
Known Address drop-down list).
Figure 26. Change Phone MAC Address/Model Menu
5. Confirm that the phone model is correct.
6. Select
Apply to apply changes and return to the Edit User menu.
7. Scroll to the bottom of the
Edit User menu and select Apply.
8. Select
OK to accept the prompt and reboot the new phone so it will download the configuration
from the NetVanta 7100. (If the phone will be rebooted at a later time, refer to the steps provided in
Rebooting a Phone on page 40.)
Rebooting a Phone
Periodically, a phone may require rebooting to accept a new configuration or software update. There are
two ways to reboot a phone:
1. Simultaneously press and hold the correct keys (key combinations are shown in Table 5) for 3
seconds or more until a confirmation tone is heard.
2. Press the
Menu key and select Settings, Advanced, Restart Phone (the user password is
required to access this menu).
The reboot process may take a few minutes. The phone will cycle through multiple information
screens on the display until it completes by returning to the idle display. In the case of problems, it may
be possible to restore normal phone operation without rebooting. Contact your system administrator
before attempting to reboot the phone.
Table 5. Reboot Phone Key Combinations
ADTRAN/Polycom IP Phone Model Key Combinations
SoundPoint IP 300 and 301 Volume-, Volume+, Hold, Do Not Disturb
SoundPoint IP 500 and 501 Volume-, Volume+, Hold, Messages
SoundPoint IP 600 and 601 Volume-, Volume+, Mute, Messages
SoundStation® IP 4000 *, #, Volume+, Select