Filter
Top Products
NetVanta 7100 Administrator’s Guide Configuring the System
61200796L1-31A Copyright © 2007 ADTRAN, Inc. 69
3. Select users to add to this ring group using the check box to the left of the user entry. Select Add
Selected Users
to update this ring group and return to the Edit Ring Group menu.
Figure 54. Add Members to Ring Group Menu
4. On the Edit Ring Group menu, select Apply to accept the new setting.
5. Select
Save at the top right of the current menu. A dialog box appears if the save is successful.
Select
OK to close the box and return to the previous menu.
Logging into and out of Ring Groups
Members can log into a ring group with a Special PREfix (SPRE) code. SPRE codes are special digits
dialed to access features of the system. Members of a ring group can enter SPRE codes on personal phones
to receive or block calls from specific ring groups.
From the desired phone, enter the following SPRE codes to log in to or log out of specific ring groups (thus
receiving or blocking those calls, respectively).
1. To enter a ring group, log in with *LLxxxx* (*55xxxx*), where xxxx is the ring group’s
extension.
2. To exit a ring group, log out with *LOxxxx* (*56xxxx*), where xxxx is the ring group’s
extension.
Select new members
using the check boxes