Filter
Top Products
NetVanta 7100 Administrator’s Guide Configuring the System
61200796L1-31A Copyright © 2007 ADTRAN, Inc. 71
2. Select users to add to this operator group by using the check box to the left of the user entry. Select
Add Selected Users to update this operator group and return to the Configure Operator Group
menu.
Figure 56. Add Members to Operator Group Menu
3. Select Apply to accept the new setting.
4. Select
Save at the top right of the current menu. A dialog box appears if the save is successful.
Select
OK to close the box and return to the previous menu.
Logging into and out of the Operator Group
Members can log into the operator group with a SPRE code when they want to receive calls to the operator
group and log out using a SPRE code when they do not want to receive operator group calls.
From the desired phone, enter the following SPRE codes to log in or log out:
1. To enter the operator group, log in with *LL0* (*550*), where 0 represents the operator group
extension.
2. To exit the operator group, log out with *LO0* (*560*), where 0 represents the group extension.
Select new members using
the check boxes.