Filter
Top Products
Modifying Existing Phones NetVanta 7100 Administrator’s Guide
32 Copyright © 2007 ADTRAN, Inc. 61200796L1-31A
Resetting a Phone to Factory Default
The basic network configuration for the ADTRAN/Polycom IP phone can be reset to factory defaults
through a key combination:
1. Simultaneously press and hold the
4, 6, 8, and * dial pad keys until the password prompt appears.
2. Enter the administrator’s password to initiate the reset. (The default password is
456).
Customizing Phones and User Preferences
There are many settings available for customizing individual phones. This section covers these commonly
used features:
• Call Lists on page 32
• Contact Directory on page 33
• Speed Dial, Line keys and Button Maps on page 34
• Line Keys on page 34
• Button Map on page 36
• Display Status Group (Busy Lamp Field) on page 37
• Customizing the Expansion Module Buttons on page 37
Call Lists
The phone maintains a local list of outgoing and incoming calls on the system. The system stores up to 100
entries for each list of missed, received, or placed calls. On the left side on the phone, press the Call Lists
key (or press the Directories key followed by Call Lists) and select Missed Calls, Received Calls, or
Placed Calls, depending on the list you want to view. Call information is displayed.
From the specific call list:
1. Choose
Edit to amend the dial string before dialing.
2. Choose
Dial to return the call.
3. Choose
Exit to return to the previous menu.
For additional choices, press
More, followed by:
4.
Info to view information about the call.
5.
Save to store the contact to the Contact Directory.
6.
Clear to delete the call from the list.
Press
More and Exit soft keys to return to the idle display.
To quickly view respective call lists from the idle display:
Press X for Placed Calls.
Press W for Received Calls.
Press T for Missed Calls.