Filter
Top Products
Methods for Customizing Your Phone
12 41-001523-00 REV00 – 04.2014
Simplified Options List
Your System Administrator may configure a simplified Options List for your phone. The following table indicates the
options that may appear on your phone if the simplified Options List is applied:
Using the IP Phone UI
Note:
*The Administrator Menu options are Administrator-level functions only, and are not accessible by the user. These
options should only be set up and changed by your System Administrator.
Option Number Option
1Call Forward
1. All
2. Busy
3. No Ans
4. All Off
5. All On
The menus that display for Call Forward are dependent on the Call Forward Mode set on the phone. Default is Account mode.
2Preferences
1. Tones
– Ring Tone
– Tone Set
2. Display
– Contrast Level
– Backlight
3. Set Audio
– Audio Mode
– Headset Mic Vol
– DHSG
3 Phone Status
1. IP&MAC Addresses
2. LAN Port
3. PC Port
4. Firmware Info
5. Error Messages
6. Restart Phone
7. Copyright
4 Phone Lock
IP Phone UI
1. Press the key on the phone to enter the Options List.
2. Press the 5 and 2 keys to view the different options.
3. Press the key, the 4 Enter key, or press the number of the corresponding option to select an option.
4. Change the selected option if required.
5. Press the key or the 4Set, or 4Done key to save the change.
6. Press the key, the 3 navigation key, or the key at any time to exit without saving changes.
Note:
For more information about customizing your phone using the available options from the IP phone UI, see the section
“Customizing Your Phone” on page 19. For more information about Administrator options, contact your System
Administrator.