Aastra Telecom 6865i IP Phone User Manual


 
Managing Calls
126 41-001523-00 REV00 – 04.2014
4. Click on Basic Settings > Account Configuration
The illustration above shows 2 accounts configured on the phone. Accounts must be set up by your System Admin-
istrator.
5. For each account, enable the CFWD state by placing a check mark in one or more of the following
State fields:
All
Busy
No Answer
The All option forwards all incoming calls for this account to the specified phone number regardless of the state of
the phone. The phone can be in the Busy or No Answer states, or can be in the idle state. The phone still forwards
all calls to the specified number.
The Busy option call forwards incoming calls only if the account is in the busy state. The calls are forwarded to the
specified phone number.
The No Answer option call forwards incoming calls only if the account rings but is not answered in the defined
number of rings. The call gets forwarded to the specified number.
Note:
You can use the Busy and No Answer states together using different forwarding phone numbers. If these states are
enabled for an account (the All state is disabled), and the phone is in the busy state when a call comes in, the phone
can forward the call to the specified phone number (e.g. voicemail). If there is no answer on the phone after the
specified number of rings, the phone can forward the call to a different specified number, such as a cell phone
number.
6. For each account, in the Value field, enter the phone number for which you want the incoming calls to forward to
if the phone is in the specified state.
If using the Account mode or Custom mode, you can enter different phone numbers for each account.
Notes:
If you selected Account mode in Step 2, you can enable/disable each account or all accounts as applicable. You
can enter different phone number for each enabled state.
If you selected Custom mode, you can enable/disable each account or all accounts as applicable. You can enter
different phone numbers for each enabled state.
If you selected Phone mode, all accounts are set to the same CFWD configuration (All, Busy, and/or No Answer)
as Account 1 on the phone. (In the Aastra Web UI, only Account 1 is enabled. All other accounts are grayed out
but use the same configuration as Account 1).
Using the Aastra Web UI, if you make changes to Account 1, the changes apply to all accounts on the phone.
Using the IP phone UI, if you make changes to any other account other then Account 1, the changes also apply
to all accounts on the phone. When enabling a CFWD state, you must specify a phone number for the phone to
CFWD to. The number you specify applies to all accounts of the same mode.
Number and name of accounts that display to this screen are dependant on the number and name of accounts
configured on the phone. The name for the account is specified by your System Administrator. Contact your
System Administrator for more information.