Filter
Top Products
Using Direct Print 65
Running Printer Maintenance Programs
You can use the camera to check the ink level in the Epson Stylus Photo R200 printer. You can also check
the status of the print head nozzles and run maintenance programs when you connect the camera to this
printer.
Note:
You can run maintenance programs from the camera only for the Epson Stylus Photo R200. For other
printers, you need to run maintenance programs from your computer.
1. Connect the camera to the printer as described in “Connecting the Camera to Your Printer” on page 58.
2. Turn the printer and camera on.
3. Turn the Mode dial to playback mode, then press the button. The Print menu is displayed.
4. Press the OK button. You see the preview screen.
5. Select Maintenance by using the u d buttons, then press the OK button.
6. Select the desired item by using the u d buttons, then press the OK button.
Checking the ink level
1. On the Maintenance screen, press the OK button to select Ink Level Check. The level of ink in the
6 cartridges is displayed on the LCD screen.
2. Press the OK button.
3. Press the MENU button to return to the previous screen.