Filter
Top Products
Viewing and Managing Your Photos 53
To transfer photos using the PC cable:
1. Make sure the camera is turned off.
2. Locate the PC cable that came with the camera. The cable has the letter B on the small
end.
3. Connect the large end of the cable to any available USB port on your computer.
4. Open the connector cover on the side of the camera and connect the small end of the
cable to the camera.
5. Turn on the camera. The blue USB light on the camera flashes.
6. Select the EPSON_DSC drive on your computer. In Windows, you may have to use My Computer to
select the drive.
7. Copy the photos from the DCIM folder to your computer.
8. Turn off the camera and disconnect the cable.
Note:
If you copy PIF images to your computer, the link between the photos and the frames will be broken. PIF
frames can only be printed directly from the camera.