Filter
Top Products
Chapter 6 LCD Menus: Advanced
V300 User’s Guide
83
Figure 100 LCD Menu: First / Second Backup SIP Server
The following table describes the labels in this screen.
6.4 The Auto Provision Menus
Use these menus if you have an auto-provisioning server on the network. When auto-
provisioning is used, the V300 downloads its settings automatically from the auto-
provisioning server, meaning you do not have to input them manually.
Select Adv Setting > AutoPro. The following screen appears.
Figure 101 LCD Menu: Auto Provision
The following table describes the labels in this screen.
6.4.1 Protocol
Use this screen to see or edit the protocol that the V300 uses to request and receive the auto-
provisioning file. This protocol must be the same as that used by the auto-provisioning server.
19 BackupSIP:
1 1st BSIP
Table 34 LCD Menu: First / Second Backup SIP Server
LABEL DESCRIPTION
Active Use this to have the V300 use the backup server settings you configure in
this menu (Enable) or to have the V300 ignore them (Disable)
SIP Serv Addr This is the IP address of the backup SIP server. See Section 6.3.4 on page
73 for information on how to configure this.
SIP Serv Port This is the listening port on the backup SIP server. See Section 6.3.5 on
page 73 for information on how to configure this.
Register Addr This is the IP address of the backup SIP register server. See Section 6.3.6
on page 74 for information on how to configure this.
Register Port This is the listening port on the backup SIP register server. See Section
6.3.7 on page 74 for information on how to configure this.
3 AutoPro
1 Active
Table 35 LCD Menu: Auto Provision
LABEL DESCRIPTION
Active Select this to turn auto provisioning on or off.
Protocol Select this to see or edit the protocol the V300 uses to request and receive
auto-provisioning files.
Serv Addr Select this to see or edit the auto provisioning server’s IP address.
Expire Time Select this to see or edit how long the V300 waits after it successfully
receives an auto-provisioning file before it requests another.
Retry Time Select this to see or edit how long the V300 waits, if it requests an auto-
provisioning file but does not receive one, before requesting the file again.