Filter
Top Products
Chapter 15 Tools
V300 User’s Guide
144
15.2.2 Restore Configuration
Restore configuration allows you to upload a new or previously saved configuration file from
your computer to your V300.
" Do not turn off the V300 while configuration file upload is in progress
After you see a “configuration upload successful” screen, you must then wait one minute
before logging into the V300 again.
Figure 142 Configuration Upload Successful
The V300 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 143 Temporarily Disconnected
If you uploaded a configuration file that sets the V300 to get an IP address automatically, use
the System Info > IP Address > IP Address LCD menu to find out its new address. See
Section 5.2.2 on page 52 for more information.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
Table 61 Maintenance > Tools > Configuration > Restore
LABEL DESCRIPTION
Restore
Configuration
File Path Type in the location of the file you want to upload in this field or click Browse... to find
it.
Browse... Click Browse... to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.