Filter
Top Products
Chapter 6 LCD Menus: Advanced
V300 User’s Guide
71
6.3.1 SIP Active
Select this to see whether the SIP account is turned on (Enable) or off (Disable). Press MENU
again to change the setting.
When the account is not active, you cannot use it to make or receive calls on the V300.
6.3.2 SIP Number
Use this to see and edit the SIP number for your SIP account.
" If you have a SIP account like “1234567@voip-provider.com”, the SIP Number
is “1234567”.
Select Adv Setting > SIP Number. The following screen displays.
Figure 66 LCD Menu: SIP Number
If a SIP account number is already configured, it displays. Otherwise, no SIP number displays.
Press MENU to edit the SIP number, or press PHONEBOOK to return to the previous screen.
SIP Local Port see Section 6.3.3 on page 72
SIP Serv Addr see Section 6.3.4 on page 73
SIP Serv Port see Section 6.3.5 on page 73
Register Serv see Section 6.3.6 on page 74
Register Port see Section 6.3.7 on page 74
Serv Domain see Section 6.3.8 on page 75
SIP Auth ID see Section 6.3.9 on page 76
Auth Password see Section 6.3.10 on page 76
1st Codec Sel see Section 6.3.11 on page 77
2nd Codec Sel see Section 6.3.11 on page 77
3rd Codec Sel see Section 6.3.11 on page 77
VM Num see Section 6.3.12 on page 78
DNS SRV see Section 6.3.13 on page 78
Send Call ID see Section 6.3.14 on page 78
NAT Setting see Section 6.3.15 on page 79
Call FW Active see Section 6.3.16 on page 82
BackupSIP see Section 6.3.17 on page 82
Table 30 LCD Menu: SIP Account Configuration (continued)
2 SIP Number: