ViewSonic V 37 PDAs & Smartphones User Manual


 
9LHZ6RQLF3RFNHW3&9 
&RQQHFWLQJWR<RXU3&
CAUTION: Do not shut down or restart your PC while your V37 is
connected. Turn off your V37 or disconnect the USB cable before you
shut down your PC.
&RQQHFWLQJE\86%&DEOH
CAUTION: Before you connect your V37 to the cradle, be sure of the
following: your PC is on, you have installed ActiveSync on your PC, and
ActiveSync is configured to allow a USB connection.
You can keep your V37 in the cradle when you are not carrying it with you,
which keeps it charged and synchronized.
For instructions on connecting, see “Installing Microsoft ActiveSync” in Chapter
1.
&RQQHFWLQJE\,QIUDUHG
You can use the IR port to synchronize data with your PC, in place of using the
cable.
IR ports can be found on many notebook computers; however, on a PC, you
may need to install and configure an IR port. To install the port, follow the
manufacturer’s instructions.
For complete instructions on connecting to your PC by infrared, refer to
ActiveSync Help on your PC.