Filter
Top Products
35
From the base:
During a call, press 1) [hold/int’com].
Press 2) [1] through [9], [0] to select the handset you want to talk with or press [
*
/tone] to page all registered
handsets. To cancel the transfer, press [hold/int’com].
When another handset accepts the transferred call, your call will disconnected. If you want to rejoin the call 3)
press [
].
Answering a Transferred Call
When a station receives a call transfer, it sounds a paging tone; handsets also show the ID of the station that is
paging. To accept the call transfer:
To answer the page and speak to the transferring 1) station, press [
/ash] or [hold/int’com/xfer] on the
handset. If Any Key Answer is on, you can also press any key on the dial pad. If AutoTalk is on, the handset
will automatically answer the page when you pick up the handset from the cradle. On the base, press [
] or
[hold/int’com].
To accept the call and speak to the caller, press 2) [
/ash] on the handset or [ ] on the base.
When you accept the transferred call, the transferring 3) station will be disconnected.
Only the rst station to answer the transfer page will be connected to the call. If the transfer page is not picked up
within one minute, the operation will be canceled.