Filter
Top Products
13
Installing the Battery
Use only the Uniden BT-446 rechargeable battery pack supplied with your cordless telephone.
Follow the steps below to install the handset battery.
Press in on the handset battery case cover (use the nger 1)
indention for a better grip) and slide the cover downward to
remove.
Plug the battery cable into the battery jack. Be sure to match the 2)
red and black wires to the label near the jack. The cable should
snap into place. Gently pull on the battery cable. If the battery
connector comes loose, try connecting again until the battery
snaps into place.
Place the battery case cover back on the handset and slide it 3)
upwards until it clicks into place.