Filter
Top Products
20
Registering WDSS 5305 Accessory Handsets
Your phone supports a total of ten (10) cordless handsets. Handset(s) supplied in the box with the phone base are
pre-registered at the factory. If you purchase an accessory handset, you need to register the handset before use.
When charged, pre-registered handsets display a handset ID number. Handsets that have not been registered
display:
*CPFUGVPQV
TGIKUVGTGFRNCEG
JCPFUGVQPDCUG
↔
VQTGIKUVGT
5GG[QWT1YPGTU
/CPWCNHQTJGNR
To register an accessory handset:
Charge the handset for 15-20 hours.1)
Place the handset in the main telephone base cradle to initiate registration. HANDSET REGISTERING will 2)
appear in the LCD.
Wait approximately thirty seconds, "REGISTRATION COMPLETE" will be displayed to indicate the handset has 3)
been registered to the base and a handset ID will be automatically assigned.
If REGISTRATION FAILED appears in the LCD, please try these steps again.
Note: If an accessory handset has ever been registered to a base, you must reset the handset before you can
register it to a new base. See Resetting the Handset on page 49.