Filter
Top Products
30
Note: When you delete a Caller ID number, you delete it permanently.
Using Call Waiting
If you have Call Waiting service and a second call comes in when you are on the phone, a call waiting tone will
sound. (If you subscribe to Caller ID on Call Waiting, the handset displays the name and phone number of the
waiting call.)
For Australian Model:
Press [
/ash] and then [2] on the handset to accept the waiting call. The rst caller is put on hold, and you will hear
the new caller after a short pause. To return to the original caller, press [
/ash] and then [2] again.
For New Zealand Model:
Press [
/ash] on the handset to accept the waiting call. The rst caller is put on hold, and you will hear the new
caller after a short pause. To return to the original caller, press [
/ash] again.
Note: You must subscribe through your telephone provider to receive Call Waiting services.
Redialing a Number
You can quickly redial the last ve numbers dialed on each handset or the last number dialed on the base.
From the handset:
With the phone in standby, press the 1) [redial/pause] to open the redial list.
Use 2) [
] and [ ] or [redial/pause] to scroll through the redial list.
When you nd the number you want to dial, press 3) [
/ash] or [ ] on the handset to dial the number.
Notes: • If the number exceeds 32 digits, only the rst 32 digits are retained in redial memory.
• If the redial memory is empty, EMPTY appears in the display and you will hear a beep.
• You can also redial the last number dialed on the handset by pressing [
/ash] or [ ], and then
[redial/pause].