Filter
Top Products
14
Installing the Belt Clip
Line up the holes on each side of the handset. To attach the belt clip, insert into
the holes on each side of the handset. Press down until it clicks.
To remove the belt clip, pull either side of the belt clip to release the tabs from
the holes.
Connecting the Base and Charging the Handset
Connect the AC adapter (AAD-041S(M)) to the 1) DC IN 9V
jack.
Connect the AC adapter to a standard 240V AC wall outlet. 2)
Place the handset in the base with the LCD screen facing 3)
forward.
Make sure that the 4) charge LED illuminates. If the LED
does not illuminate, check to see that the AC adapter is
plugged in and the handset makes good contact with the
charging contacts.
Charge your handset at least 15 to 20 hours before 5)
plugging into the phone line.
To AC outlet
To DC IN 9V
AC adapter (supplied)
Ro ute the cord.
Caution: To avoid risk of re and shock, only
use the Uniden AAD-041S(M) adapter.