Filter
Top Products
19
Adding Accessory Handsets
Your phone supports a total of ten cordless handsets. You can now place a fully-featured cordless handset anywhere
AC power is available to connect the handset charger. All the handsets ring when a call is received.
Compatible Handsets
Your phone is compatible with the WDSS 5305. If you purchased an accessory handset separately, you must
register the handset to the base before use. Accessory handsets will not operate until they are registered.
Charging Accessory Handsets
The handset’s battery recharges automatically when the handset is placed in the charger.
Use the supplied AC adapter (AAD-600S(M)) to connect 1)
the DC IN 9V jack to a standard 240V AC outlet.
Set the charger on a desk or tabletop, and place the 2)
handset in the charger with the LCD screen facing
forward.
Make sure that the 3) charge LED illuminates. If the LED
does not illuminate, check to see that the AC adapter is
plugged in and the handset makes good contact with the
charging contacts.
Charge the handset battery pack for at least 15-20 hours 4)
before using your new handset for the rst time.
To AC outlet To DC IN 9V
AC adapter (supplied)
Ro ute the cord.
Caution: Use only the Uniden AAD-600S(M) adapter.