Filter
Top Products
[ 58 ]
4-WAY CONFERENCING
INTERCOM/CALL TRANSFER FEATURE
Fourth person, at either the handset or the base, may be added to the conference call.
For example, to add a fourth party to an ongoing conference call at the base or another
handset, press on the fourth party’s handset (or on the base). To remove
either caller from your conversation, press on the party’s handset (or on the
base). The other parties will still be connected to the call.
Intercom and Call Transfer features are available for your phone.
Intercom
From handset to handset or to the base
1) Press /transfer/int’com in standby mode.
2) Select the base or the handset you want to talk with
from the selection list within 30 seconds. To select the
handset (or the base), press /vol/ or
/vol/ , and then press . If you select All,
all handsets and the base will be paged. An intercom
tone sounds.
3) On the receiving handset (or the base), to answer the call, press or
/transfer/int’com (or intercom or on the base). Or press any number key,
tone
, or (when Any Key Answer is on), or pick up the handset from the
cradle (when AutoTalk is on).
4) To hang up the intercom call, press on either handset (or intercom on the base).
From the base to a handset
1) Press intercom on the base in standby mode.
2) Select the handset you want to talk with by pressing number key (1-4).
To page all the handsets press
tone
.
3) Follow the steps 3-4 under “From handset to handset or to the base.”
To intercom
Handset #2
Handset #3
• If the party is busy
or out of range, the
handset returns to
standby mode.
• If any of the
following occurs
while selecting
the other handset
(or the base), the
operation will be
canceled.
- Press
or .
- Receive an outside/
intercom call or
page.
• When the party
does not answer
within one minute,
the operation is
canceled.
•
Standby Mode
- The handset is
not in use and
has
not been pressed.